Hack-Whack installation guide 10.10.5 Revised 9/18/2016 Contributors: Elliott Balsley Gigabyte GA-X99-Designare Broadcom BCM94352Z WiFi/BT M.2 (replace the built-in Intel M.2 card) Intel i7-6950x (10-core Broadwell-E) EVGA Titan Black This guide will do most of the installation using another mac, then near the end, you move the hard drive over to the Hackintosh. Not …
Step 7) Remove only the two necessary retaining screws, circled in red: Step 8) Carefully move the metal heatsink and I/O cover out of the way, preferably placing it inside a plastic bag or some other cushioning material. Be careful not to damage other components by having this big metal block swinging all around! Step …
Build Motherboard – Gigabyte Z170X Gaming 5 Power Supply – Corsair AX760 Graphics Card – NVIDID GeForce GTX 960 4095 MB Memory – 32 GB 2700 MHZ DDR$ Processor – 4.0ghz Intel i7 6700k 8mb cache (Skylake) Processor Cooler – Cooler Master Hyper 212 EVO SSD – Samsung 850 EVO M.2 500gb Step by …
Build Gigabyte Z170X Gaming 5 I7-6700k Radeon RX 580 Nitro+ 8gb Corsair Vengeance LPX 2x16gn DDR4 at 3200mhz Samsung 500gb V-NAND SSD 850 Evo M.2 Corsair AX 760 Power Supply OS is 10.14.2 17,1 SMBIOS Used this guide (but with 10.14.2)- https://hackintosher.com/guides/guide-to-fresh-installing-macos-mojave-on-a-hackintosh-10-14/#config https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/skylake https://clover-wiki.zetam.org/configuration/boot#boot_xmpdetection Added NoVPAJpeg.kext (trying to fix preview) Restarted …